Content Comparison

...

All data that you can access via Graph Plots (see Graph your data) is available for review. The data that is available is determined by the duration of the Pause Buffer, an advanced property that is configured in the Processing panel (for details, see Live Review).

You can review live data for longer than the pause buffer, but you must add this data as an active channel in Graph Plots.

...

1. Ensure that the Pause Buffer Size (see the Output section in Processing parameters) and Live data range (see Live data range) are as required.
   All data exported during live review is displayed according to the Live data range.
2. Pause live data. To do this either:
   • Press the space bar; or
   • On the right of the time bar, click Enter Review.
   Live data is paused and on the right of the time bar at the bottom of the Workspace buttons are displayed that enable you to move through the paused data. 
3. Use the time bar controls to move through the paused data as required:

   • To play or stop the replay of the paused data, click the Play / Stop button Image Modified

      

     /

      

     Image Modified

      on

     on the right of the time bar.

   • To view a particular part of the data, drag the slider along the time bar.

   • To move through the paused data one frame at a time, click the Previous Frame Image Modified

      or

     or Next

     Frame 

     Frame Image Modified

      buttons

     buttons, or press

     the A

     the A or S keys.

   • To replay continuously, click the Loop

     button 

     button Image Modified.

3. To exit review mode, press the space bar again or click the Exit Review button to the right of the time bar.