...
- Connect the Pulsars to the PC via USB, either by using the supplied recharging dock or directly, using USB cable(s).
- From the Windows Start menu, click Vicon, then Vicon Pulsar Reprogramming Tool.
- In the Pulsar Reprogramming Tool window, click Target Firmware and select the firmware file to update to.
- Before you update, ensure you have closed any other Vicon applications that you may have opened.
- To update to the selected firmware version, click OK.
When the firmware has been updated, reboot the Pulsars, either by unplugging them or by turning off the recharging dock.
Tip: If at any time, the Pulsars' settings become corrupted (for example, if the Pulsars become unresponsive and don't connect to the system), in the Options section, select Reset to factory default settings to reset them.
...
- Ensure your cameras are physically connected to the system.
- Ensure your Evoke system hardware is switched on, and that Evoke is running.
In the System panel (by default located on the left of the Evoke window), click the Vicon Cameras section heading (or click a camera and press Ctrl+A) to select all the cameras or, for a large number of cameras, right-click and click the relevant Select option.
- In the Workspace ensure that the Cameras view is selected.
- Using the default lens settings on each camera, ensure that:
- You can see Pulsar images from each connected camera.
- Two or more cameras can see every point in the volume in which you intend to track motion.
...