Content Comparison

...

1. In the Tracking Setup panel, enter the name of the character that you want to create from clusters in the volume.

   Image RemovedImage Added

2. At the top right of the panel, display the Advanced options , and under Character, in the Template list, select the appropriate template, depending on where the spine cluster is mounted:
   

   • ClusterTemplate: Default template. For use if the spine cluster is mounted on a backpack or the Vicon-supplied backstrap
     
   • ClusterTemplateBelt For use if the spine cluster is mounted on a belt, in line with the spine
     
   • ClusterTemplateWaist For use if the spine cluster is mounted on a strap around the narrowest part of the waist, in line with the spine
     

3. Anchor
   SelectRetarget SelectRetarget

   From the Retarget list, select a retarget file. (You can use the supplied ViconFemaleSample or ViconMaleSample.)
4. In the Slots section below, click the first slot (Head), select either an OculusRift, HPReverb, HTCVive or a Hat, depending on the accessories that you are using. (Note that the supplied templates for supported headsets include two device slots for the front and top of the head.)

   Scroll pagebreak

5. If you are using two reference objects (typically Pulsar clusters for both the head and the spine), in the Spine slot, select the Backstrap template or your own template for the backpack you're using. Alternatively, if you're using the ClusterTemplateBelt or ClusterTemplateWaist template, in the Hips slot, select the Pulsar template.As shown in the following examples, which show commonly used setups, you can leave the rest of the slots empty.

   Image RemovedImage RemovedImage RemovedImage AddedImage AddedImage Added

6. At the right of the the Character line, click Create.

...