...
- New Vicon-proprietary varifocal lens for highest quality data, with wide and narrow Fields of View
- IP65 rating, for challenging environments
- Unparalleled resolution (26 MP), offered by the VK26
Scroll pagebreak
In addition, all models offer:
- Status lights and display A front-facing TFT LCD (thin film transistor liquid crystal display) as well as side-mounted status lights, which give clearly visible camera ID information and system feedback. For more information, see Valkyrie status LEDs and TFT LCD display.
- Accelerometer This enables you to select a camera in the volume by tapping it, and monitors the camera position to let you know if the camera is accidentally knocked or moved from its intended position. For more information, see Valkyrie Tap to Select feature and Valkyrie bump detection and display.
- Automatic temperature monitoring Thermal sensors monitor camera temperature levels, so that you are warned of any changes in temperature that could affect the system status. For more information, see Valkyrie temperature display.
...
| Scroll only | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||
| Scroll ignore |
|---|
...
| Anchor | ||||
|---|---|---|---|---|
|
...
After the camera has booted, you can check the cameras' status by observing the status LEDs and the display on each camera. You can also monitor the camera status in Nexus.
| Scroll ignore |
|---|
| Scroll pagebreak |
|---|
| Anchor | ||||
|---|---|---|---|---|
|
...
For information on removing a camera's bumped status and changing Bump Detection Sensitivity, see Valkyrie bump detection and display.
| Scroll ignore |
|---|
...
| Anchor | ||||
|---|---|---|---|---|
|
...
- In the System Resources pane, select a camera (or all cameras).
- In the Properties pane, expand the Settings section and clear or select Enable Accelerometry.
- When Enable Accelerometry is selected, if a calibrated camera is accidentally knocked, its icon changes in the System Resources list.
In addition, the camera's Bumped check box (in its Status properties) displays a check mark.
Scroll pagebreak
To change the sensitivity of the accelerometer:
...
- Bump detection is active only on calibrated cameras.
- Bump detection cannot detect movement that does not change the local gravity vector, for example. slow translation with no rotation; rotation about the G-vector.
- Bump detection cannot detect movements that occur when the camera is not connected to a live system.
- The camera is detected as bumped when the reading from the accelerometer is sufficiently different from the last reading that was sent. Therefore gradual changes (for example, a slipping camera mount) may not be detected until they are large enough to trigger a new notification.
| Scroll ignore |
|---|
| Scroll pagebreak |
|---|
| Anchor | ||||
|---|---|---|---|---|
|
...
You can change the upper and lower bounds of the temperature range in the Options dialog box (F7).
| Scroll ignore |
|---|
Improvements to video transcoding
...