The RED Komodo camera is supported for SDI video in Shogun Live. Full details of how to set up and use the camera can be found in the Komodo Operation Guide. This document includes the extra information required to set up and use the camera with Vicon Shogun Live.
...
Status | On-screen display | Explanation |
|---|---|---|
Genlock and timecode being received | |
|
Genlock being received but not timecode | |
|
| Timecode being received but not genlock | | |
| Neither timecode or genlock being received | |
Ready to capture in Shogun Live.
Fix problems with camera setup before capturing or calibrating in Shogun Live.
| Note |
|---|
| Important Shogun Live does not visually indicate whether the camera is getting a genlock signal and cannot tell whether the camera is getting external timecode or generating it internally, so you must check this on the camera itself. |
| Scroll pagebreak |
|---|
Set up the SDI output
Connect the SDI output to the capture PC's capture card. If multiple outputs are required (eg, for a monitor), we recommend using an SDI distribution amplifier.
Set resolution and frame rate
- To set the resolution for the SDI output, on the camera's onscreen display select Menu > Monitoring > SDI > Resolution .
To set the frame rate, select Menu > Monitoring > SDI > Frequency.
| Note |
|---|
| UHD and DCI Shogun Live supports progressive video standards up to 4K, as long as a compatible capture card is used. However, it has been more rigorously tested with the UHD standards (1920 × 1080, 3840 × 2160) than the DCI standards (2048 × 1080, 4096 × 2160). |
...
On the camera's onscreen display, select Menu > Monitoring > SDI. Change all of Guides, Tools, and Overlay to 0 (red color, meaning off).
