...
This command compares the data on each side of a gap to other markers to determine if they move rigidly with the selected marker around the gap.
The fragment considered on each side of the gap must be at least 1 and is clamped at no more than 360 keys. Gaps within the range of 10 or less are considered part of the fragment.
...
| Scroll tablelayout | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| Name | Type | Comments |
|---|---|---|
maxDeviation | Specifies in mm how rigid the set of markers used to fill must be as the max deviation in distance between all pairs in the set. For example, a value of 60 would mean the markers may flex in rigidity by 6 cm. | |
maxDistance | Specifies how far away in mm the candidate can be from the selected marker. The default of 900 of900 is just under 3 feet, because anything more is likely another subject or body part which isn't likely to move rigidly during the gap. | |
percentTimeRigid | Specifies the percentage of time over the adjacent fragment ranges that the selected marker must be rigid with the chosen set. The default of 0.75 means 75% of the time. |
...