...
In the Target Skeleton Setup section, next to Parts and Sides, select Auto Set.
This assigns the appropriate side name and part name to each bone that has active DoFs.
Scroll pagebreak Side names are set by first using each bone's name, for example, if it contains
center,left,right,l_,r_, etc.If the side can't be deduced from the bone's name, its position relative to the root is used.
The Part name is set based on the bone name matching commonly used names.
Verify that the sides and parts are set correctly. If necessary, modify them by selecting bones in the list (or elsewhere in Post) and using the Manually Set buttons above the list.
For example, if the part for the head is set to None, in the Target Skeleton Setup list, select the head and from the Body Part list above the list, select Head.
Scroll pagebreak
...