| Scroll only | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||
| |
| Scroll pagebreak |
|---|
| Anchor | ||||
|---|---|---|---|---|
|
Tracker 3.6.1 new features
...
The following enhancements were added to Vicon Tracker 3.6.1:
| Anchor | ||||
|---|---|---|---|---|
|
Entrance Threshold can now be per object type
...
...
Location: Resources pane > Objects tab > Object Type Preset section > Manage Presets > Objects Presets dialog box
...
- On the Objects tab, in the Object Type Preset section, click Manage Presets.
- In the Object Presets dialog box, create a new preset and in the Object Tracking section, specify the require Entrance Threshold.
- On the Objects tab, select the object to which you want to apply the preset.
- In the Object Type Preset section, select the preset that you created.
| Anchor | ||||
|---|---|---|---|---|
|
System synchronization from 100 Hz square wave
...
...
The VESA sync input on Vicon Lock devices now supports the connection of a 100 Hz square wave signal for synchronizing the Vicon system to an external clock.
...
- Improvements to tracking
- Easier checking for firmware updates
- Motion Model filter for selected objects
- 32-bit version of Tracker
- Disable/enable camera strobes
Improvements to tracking
| Anchor | ||||
|---|---|---|---|---|
|
Improvements to tracking
Several improvements to tracking include:
- The ability to resolve objects that are close together now enables very small objects to be tracked when they are closer than 10 mm.
- Greater intelligence in the centroid-fitting of data minimizes the impact of large reflections on latency of the system.
- More robust centroid-fitting with objects that are closely similar.
| Anchor | ||||
|---|---|---|---|---|
|
Easier checking for firmware updates
...
Location: Help > Check for firmware updates
...
You can then update your firmware using the Reprogram Firmware dialog box.
| Scroll pagebreak |
|---|
| Anchor | ||||
|---|---|---|---|---|
|
Motion Model filter for selected objects
...
Location: Resources pane > Objects tab > Object Type Preset section > Manage Presets > Objects Presets dialog box
...
- On the Objects tab, in the Object Type Preset section, click Manage Presets.
- In the Object Presets dialog box, create a new preset and select Motion Model.
- On the Objects tab, select the object that you want Tracker to detect as stationary.
- In the Object Type Preset section, select the preset that you created.
Scroll pagebreak
| Anchor | ||
|---|---|---|
|
...
|
32-
...
bit version of Tracker
A version of Tracker 3.6 that runs under 32-bit Microsoft® Windows® is now available.
...
| Info |
|---|
| Note Vicon recommends the use of the 64-bit version of Tracker, but the 32-bit version is provided to enable Tracker to be used on older PCs. However, the 32-bit version is provided as-is and with no guarantee of support. |
| Anchor | ||
|---|---|---|
|
...
| ||
| Anchor | ||
|---|---|---|
|
Disable/
...
enable camera strobes
Location: System Resources pane > Vicon Cameras node > Vantage or Vero camera(s) selected > Properties pane > Settings section
...