...
| Control | Description |
|---|---|
| Compute Object Quality | When selected, Object Quality scores are computed for each object. Default: Selected |
| Low Jitter mode | When selected, sets the Grayscale Mode for all cameras to Only, which applies advanced centroid fitting and jitter reduction algorithms to reduce data noise. Note that running in this mode increases sensitivity to bandwidth limitations and its effectiveness is related to system size. For more information, contact Vicon Support. Default: Selected |
| Thread Count | Specify the number of threads to use for object tracking. If zero (the default), the thread count is automatically calculated. Default: 0 |
| Enable Constant Velocity Tracker | If selected, improves tracking for fast-moving objects. It requires more computation so increases latency and decreases throughput. Default: Cleared |
| Entrance Threshold | The minimum proportion of markers that must be visible to the cameras before the object is booted. If it is less than this value, the object is not booted. You can override this value for selected objects by using Object Presets (seeResolve issues with object similarity in Getting started with Vicon Evoke. When set to its default value, 100% of markers are needed to boot the object, but it may take longer to boot than lower values. Default: 1.00 |
| Maximum Boot Iteration Count | The maximum number of iterations allowed for the booting algorithm. Increasing this parameter improves booting quality, but has a small performance cost. Default: 100 |
| Minimum Object Marker Separation | The minimum distance allowed between marker positions on each object in order for objects to be tracked separately. Default: 10 |
| Boot Recon. Min. Cams | The minimum number of camera rays required to generate the reconstructions that are used for object booting. Default: 2 |
| Halve Processing Rate | Processes every second frame that comes from the centroid system. You can select this option when the host machine is not powerful enough to process every frame at the current rate. Default: Cleared |
...
| Control | Description |
|---|---|
| Enable Bias Handling | Computes and corrects for camera calibration bias. See Compensate for camera calibration drift in Getting started with Vicon Evoke. Default: Selected |
| Enable Auto Bump Healing | Enables automatic healing of bumped cameras. See Automatic recovery for systems with strobed cameras in Getting started with Vicon Evoke. Default: Selected |
| Generate Online Masks | For use in systems that include cameras with built-in strobes (such as Vero or Vantage). When selected, enables the generation of online masks based on live data and uses these to improve the system health score. These masks are used to remove static, unlabeled centroids from consideration when generating the System Health Centroid Connectivity metric, which is used to determine when a camera requires automatic bump-healing. This option is particularly useful when a camera has been bumped and previously masked grayscale data becomes visible; it prevents a camera being repeatedly, unnecessarily bump-healed. Default: Cleared |
...
| Control | Description |
|---|---|
| Pause Buffer Size | The size (in seconds) of the output cache. See also Pause Buffer. Default: 2.00 |
DataStream Output section
...