Content Comparison

...

Ideally, a segment should be defined by three or more markers in the following order: one to define the origin, one to define the primary axis of the segment and one to define the secondary axis. In addition, any number of additional markers that do not specifically define the segment's axes can be added.

To create segments:

1. Go to the Subject Preparation tab of the Tools pane Image Modified.

2. In the Labeling Template Builder section, click in the Create Segments field. Enter a name for the first segment, for example Pelvis, and then click Create.
   

   Image Modified

   Segment names can contain spaces, and if they are preceded by Left or Right (followed by a space), they are automatically colored appropriately if you are using the default color scheme.
   The mouse pointer changes to a cross-hair with the label Select the Origin Marker.

   Image Modified

3. In the 3D Perspective view, click on the marker that defines the origin of the segment you are creating. For the Pelvis, this could be the LASI or the RASI marker.

   Tip

   Tip
   Choose the origin marker for distal segments to be on a more proximal segment. However, remember that the purpose of the labeling skeleton template is to define a labeling skeleton that is suitable for labeling. The segments are related to marker positions, not to joint centers as in a biomechanical model.

   Nexus highlights the selected marker. The mouse pointer label changes to Select the Primary Axis Marker.

   Image Modified

4. Click on the marker that defines the primary or long axis of the segment you are creating. For the Pelvis, this could be the unused LASI or RASI marker. 
   Scroll pagebreakThe marker is highlighted and the mouse cursor label changes to Select the Secondary Axis Marker.
   

   Image Modified

5. Click on the marker that defines the secondary axis. The marker is highlighted and the mouse cursor label changes to Select an Additional Marker.
   This marker will fully define the segment by requiring the primary axis and the secondary axis marker to be in the same plane. For the Pelvis, this could be the SACR marker.
6. Click on the chosen marker.

   Image Modified

7. In the same way, select any other markers that you want to associate with the same segment.

   Image Modified

   Tip

   Tip
   If you have problems selecting a marker, it may be because the selection operation selects something else, like the bounding box of a segment. To turn off the visualization of the segment, clear the Subjects option in the Options dialog box.

8. When you have finished creating the segment, click again on the Create button. 
   In the 3D Perspective view, the selected markers are now displayed in gold. The segment's axes are displayed as X=red, Y=green and Z=blue. By convention, the Z axis is the primary axis and the secondary axis marker defines the YZ plane.

   Image Modified

   Tip

   Tip
   If, at any point in the steps above, you make a mistake (for example, you click on the wrong marker), you must finish creating the segment first and then use the Undo operation to remove the segment. You can do this by either using the CTRL+Z shortcut or clicking the Undo button on the Nexus toolbar. You can then recreate the segment.

9. Repeat the above steps to define all segments.
   All markers must be part of at least one segment.

   Note

   Important
   When you create segments, they are only valid for that particular frame. For this reason, you must create all segments on the same frame. To verify that all segments exist in a frame, ensure that all segments are in black (and not gray) in your subject's segments list. If some segments are black, and some are gray, delete the gray segments (and associated markers) and re-create those segments until all segments are in black. This is vital for the next step of linking segments.

Anchor
SegmentTips SegmentTips

Tips for creating segments

...

• The majority of models in biomechanics involve linked segments which form a chain, such as Pelvis-Femur-Tibia-Foot, and such models describe the movements of each segment relative to the more proximal segment.
• The auto-labeler will perform better if the skeletal topology defined in the template file roughly matches a simplified version of the real anatomical structure. Therefore, Vicon strongly recommends that you define the labeling skeleton template using segments that are as close to the real anatomy as possible.scroll-pagebreak

The following are additional tips and recommendations to help you in defining segments:

• Start by defining the root segment (the most proximal) and work your way towards the leaf segments (the most distal ones). Often, the root segment will be the pelvis or the thorax segment when defining a human labeling skeleton template, but it could be any segment.
• Where possible, align a segment's primary axis with the biomechanical long axis. Where there is no obvious long axis (as in the pelvis or trunk segment), the long axis can be defined using any two markers.
• If two markers are assigned to the same segment and the distance between the two markers will change significantly during the trial, we suggest that you optimize the VST with a Range-Of-Motion (ROM) trial (see Calibrate a labeling skeleton using a ROM trial in the Vicon Nexus User Guide. Alternatively, you may want to look at creating a separate segment altogether.
• If you are creating a segment with restricted movement, for example, finger markers, it may make sense for your segment to consist of only two markers.

...