...
Note that you only need to change the origin of smart objects that you create manually or from custom templates: the built-in smart object templates already have the correct origin set.
To activate the object manipulator:
To pause Evoke, click Enter Review at the bottom right of the Workspace.
- Select the smart object.
In the 3D View, click the object manipulator button.
In the Workspace either:
- Drag the manipulator to move or rotate the smart object to the required location; or
Enter the required values in the Translation and/or Rotation fields;.
Tip
: To scale the Manipulator, on the numeric keypad, press + (scale up) or - (scale down).
Note that the manipulator operates in local or global space (corresponding to the object coordinate system or the world coordinate system respectively). To switch between the two, click one of the buttons at the right of the Object Manipulator heading 
.
In the 3D View, you can align a selected object's axes to the global axes, a selected marker, or to the center of multiple selected markers. To do this, select the relevant object(s) or marker(s), activate the Object Manipulator 
and then expand Alignment Tool at the bottom. For more information, see Understand the alignment tool.
...
- In the System panel, right-click on the device(s) that you want to remove.
Point to Remove, and then click Selected.
