Versions Compared

Version Old Version 8 New Version Current
Changes made by

Gisela Roberts

Dev Ops

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Excerpt

Scroll tablelayout
sortDirectionASC
repeatTableHeadersdefault
widths18%, 82%
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

ControlDescription
Enabled The enabled state of the device
Default: Selected
User ID The customizable numeric ID of the device
Name A user-defined display name for the entire set of Vicon devices or for each individual Vicon device.
Preview Mode Displays the current preview mode (Off or Previewing).
Device ID The unique identification number Vicon assigns to each Vicon device during manufacture.
Serial Number The device's serial number (if set).
Firmware Version
The version number of the Vicon firmware currently installed on the Vicon device.
MAC Address The Media Access Control (MAC) address assigned to the Vicon device during manufacture. This is a hexadecimal value in the format ##.##.##.##.##.##.
IP Address The Internet Protocol (IP) address assigned to the Vicon device on the Vicon Ethernet network.

Scroll tablelayout
sortDirectionASC
repeatTableHeadersdefault
widths18%, 82%
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Destination IP Address Determines to which port and network adapter on the host PC the device sends data.
Always choose the shortest possible path between the device and the computer and ensure that the network adapter with the destination IP address is plugged into the same Vicon connectivity device or switch as the device.
Default: Default
For more information, see Vicon system setup information.
Enable Active Markers

Displays the status of the LED on the front of Viper and Valkyrie cameras.
This parameter is read-only.

Scroll pagebreak

Anchor
OpticalSetupsection
OpticalSetupsection

...

ControlDescription
Radio Channel

Displays the radio channel to use. To avoid interference, ensure each radio device in range uses a different channel.
To perform a radio scan to check which Beacon channels are clear from interference from other radio devices and Wi-Fi, right-click the Beacon and select Radio Channels. For more information, see Turn on the Beacon and enable pairing in the Vicon Evoke User Guide.
Default: None

Radio Host ID

IEEE 802.15.4 Coordinator ID, assigned by Vicon to each radio host during manufacture. Required for pairing devices via USB or API.

Radio PAN ID

IEEE 802.15.4 Personal Area Network (PAN) ID assigned to the device on the Vicon wireless network. Required for pairing devices via USB or API.

...