Cameras are connected to the PC via a number of 26-port network switches, which also provide power to the camera as well as route data back. These switches can provide sufficient power for up to 12 Vantage cameras and two other devices (Vue or Bonita reference video or Lock unit).
...
A medium-sized system showing how a Lock unit can be connected to a system that includes two switches
...
...
Note
If the system includes a Lock unit, it must be connected via an additional PoE switch, shown in the following diagram by a Gigabit PoE+ switch with 10 GbE uplink.
The following is an alternative configuration for a Vantage system with a Lock.
Vantage system with two Locks
...
| Info |
|---|
Note |
| Anchor | ||||
|---|---|---|---|---|
|
A medium-sized system showing how one reference video camera can be connected to a system that includes two switches
...
A larger-sized system showing the interconnection of three or more switches and other devices. Further 26-port PoE switches attach to spare 2.5 GBase-T PoE ports on the Gigabit PoE+ switch with 10 GbE uplink.
...
A very large system showing the interconnection of four or more switches and four or more Vue video cameras. You can connect up to eight Vue video cameras to the Gigabit PoE+ switch.
To add a fifth PoE+ switch, use one of the spare 1G ports.
Vantage system that includes a FLIR Blackfly camera
A small Vantage system that shows how to include a Teledyne FLIR Blackfly S camera.
| Excerpt | |
|---|---|
Connectivity for Lock StudioconnectivityVicon Lock Studio can be used in place of Lock Lab in the previous scenarios to provide the following connections:
|
