| Excerpt |
|---|
| Note |
|---|
Important Blue Trident sensors- Windows 10 and later only is supported. Ensure the latest Windows 10 updates are installed.
- The firmware for Blue Trident sensors that are to be used with Nexus 2.10 or later must be updated to version 9.0.2 or later, using Capture.U Desktop 1.1 or later, which is available from the Capture.U page on the Vicon website.
- Second-generation Blue Trident sensors are supplied with Firmware 10 – do not downgrade their firmware. If you have first-generation Blue Trident sensors, you can safely downgrade their firmware, if necessary. However, as Capture.U 1.3.1 Desktop is not compatible with firmware earlier than 10.#, if you downgrade the firmware from version 10, you must uninstall Capture.U 1.3.1 and use an earlier version of Capture.U.
Blue Thunder sensors- Blue Thunder IMU sensors are not supported in Nexus 2.10 or later. If you want to capture Blue Thunder data, use Nexus 2.9.x.
- You can load existing processed trials with Blue Thunder data into Nexus 2.10 or later and view the captured IMU data.
- The IMeasureU plug-in is not available in Nexus 2.10 or later.
|
|
...
World X, Y and Z angle axis components (degrees) and local X, Y and Z angle axis components (degrees).
X, Y and Z are the world transformation. If the volume origin orientation is changed, they must be recalculated (using Align to World and Copy).
X2, Y2 and Z2 are the local transformation. They must be recalculated using Align to Segment every time the sensors are attached.
For more information, see Align IMU data to the Vicon world in the Vicon Nexus User Guide.
Radio Sync section
| Property | Description |
|---|
| Prefer Radio Sync | When selected, radio sync (via a Vicon Beacon) is used to synchronize your IMU sensor data to your Vicon system.
Default: Selected |
| Radio Sync Device | Indicates whether or not a radio sync source (Vicon Beacon) is available. |
| Note |
|---|
Note
Nexus supports the use of only 1 Vicon Beacon in a Vicon Nexus system. |
