...
| Component | Description |
|---|---|
| Valkyrie cameras | Valkyrie cameras (VK26, VK16 and VK8) can be used with Tracker 4.1 and later. You can use Valkyrie cameras with Vero, Vantage, and Viper (including ViperX) cameras in systems running Tracker 4.1 and later. See also the Vicon Valkyrie documentation. |
| Vicon Viper and ViperX cameras | Viper cameras and ViperX cameras can be used with Tracker 4.1. You can use Viper and ViperX cameras in systems running Tracker 3.8 and later. See also the Viper documentation, Connect cameras and Configure Vicon cameras. |
| Vicon Vero cameras | Vicon Vero cameras (v1.3 and v2.2) can be used with Tracker 4.1. You can use Vicon Vero cameras in Vicon Valkyrie and Vantage systems. See also the Vero documentation, Connect cameras and Configure Vicon cameras. |
| ViconVantage Vicon Vantage cameras | Vantage cameras (V16, V8, and V5) can be used with Tracker 4.1. See also the Vicon Vantage documentation, Connect cameras and Configure Vicon cameras. |
| Vicon connectivity units | Vicon Lock devices facilitate the integration of synchronous third-party equipment with Vicon cameras by providing or receiving synchronization and/or timecode. Lock Lab also provides connectivity for third-party analog capture sources, such as force plates and EMG equipment. Connect to a PoE switch to which the host PC is connected. Vicon Lock Lab and Vicon Lock Studio are RoHS-compliant. See also Configure Vicon connectivity devices and Configure analog devices. |
| Switches | Switches obtained from Vicon that may provide PoE, PoE+, UPoE, and SFP+ connectivity |
| Host PC | The main PC in the Vicon system, with at least one dedicated Ethernet port to enable Vicon system communications (in addition to any other network ports on the PC). Vicon Tracker application software is installed on this PC. Remote PCs may be used for other Vicon application software or third-party applications connected to the host PC via Ethernet. |
| Vicon cables | Proprietary Vicon cables plus commercially available Ethernet cables and transceivers connect Vicon system components, providing a combination of power, Ethernet communication, synchronization signals, and data. |
| Vicon calibration device | Specialized device used to accurately calibrate the Vicon system. See also Calibrating Vicon cameras. |
| Vicon accessories | Supplies for the Vicon system, including markers, tape, and Velcro. |
| Vicon engineering software | Vicon Tracker software, DataStream SDK and Vicon Virtual System. |
| Analog devices | Your Vicon system may also include one or more analog devices, such as LVDTs, accelerometers, and load cells. See also Configure analog devices. |
...