About this guide
This guide contains instructions for using Vicon Nexus. It explains configuring your Vicon system within Nexus and the basic tasks that make up the everyday Nexus workflow. It assumes you have already installed and licensed Nexus and set up your Vicon system hardware. If you need information about these procedures, see Installing and licensing Vicon Nexus and/or the Vicon documentation that was supplied with your hardware.
For help with how to connect up your Vicon system, see Vicon system setup information.
You can also contact Vicon Support.
Videos of many of the procedures described in this guide, including additional tips and examples, are available from the Nexus 2 How To playlist and the Vicon Nexus 2 Tutorials playlist on YouTube, beginning with system calibration.
As the videos were recorded using an earlier version of Nexus 2, you may notice small differences in the user interface.
Regulatory information
For regulatory documentation relating to Vicon Nexus and your Vicon hardware, see Regulatory information.
