If you're using Shogun 1.10 or later, you can keep the solving skeleton's finger calibration from Shogun Live but use Auto-Skeleton to provide the body calibration.

To do this:

Calibrate as normal in Shogun Live (1.10 or later).
Load the resulting calibration MCP into Shogun Post.
In the Subject Setup panel, click the Solving tab, and then Actor Setup.
Ensure Use Auto-Skeleton is selected.
Clear the Auto-Skeleton options Pose Fingers and Scale Fingers.
Click AS Calibrate to run Auto-Skeleton.

Shogun Post recalibrates the body using Auto-Skeleton, but leaves the finger calibration from Shogun Live.

Browser not supported