Depending on the type of Vicon system on which you are running Vicon Tracker, your Vicon system architecture will contain one or more Vicon Lock devices. Lock devices are connectivity units that facilitate the integration of synchronous third-party equipment with Vicon cameras by providing or receiving synchronization or timecode. Lock Lab also provides connectivity for third-party analog capture sources, such as force plates, EMG equipment, and generic devices.

When one or more Vicon connectivity device is connected to the Vicon Tracker system, the Connectivity Devices section is displayed in the System panel. The Connectivity Devices section lists each device of this type in your system.

To configure a Vicon connectivity device:

In the System panel, go to the Connectivity Devices section and click the relevant connectivity device.
The properties for the selected connectivity device are listed in the pane below.

For information on the properties you can configure for connectivity devices, see Connectivity device properties.

For more information on Vicon Lock devices, see:

Vicon Lock Lab Quick Start Guide (PDF)
Vicon Lock Studio Quick Start Guide (PDF)
Vicon Systems Setup Guide

Loading

Browser not supported