To help you identify and fix bad data, you can use the Marker Editing panel.

To find and remove bad data:

1. To open the Marker Editing panel, in the Processing menu, select Marker Editing (or select Marker Editing on the Processing tab of the ribbon).

2. In the Remove Bad Data section, go to the Find Bad Data button and notice the options:

   • Threshold Allowable deviation

   • Cut-Off Data filter. Decreasing this value filters the data more heavily.

   • Sensitivity Amplifies the effect of the Cut-Off filter.

     

3. Select Find Bad Data.

4. Experiment with these values to find out what works best for your data.

5. When you have identified the bad data, remove it by selecting the appropriate Cut button, and apply a fill (see Gap-filling options).