After you've installed and licensed Vicon Shogun Markerless and positioned the cameras, you can set the camera aperture and focus.

Set the aperture on the camera to enable you to view the scene.

Tip
For a 5 m x 5 m volume, set the aperture to 1.8.

If the image that you see of the subjects isn't sharp enough, ensure the volume is sufficiently and evenly lit, and focus the camera so that you can see a clear image of the subjects throughout the volume (or within the part visible to the camera). To focus the camera, loosen the grub-screw above the lens and screw the entire lens in/out.

Tip
You can change the brightness of the lights by adjusting their settings in Vicon Shogun Markerless. For information on how to do this, see Set the brightness of the Vicon IR lights in Getting started with your Vicon Markerless system.

Browser not supported