...
- Ensure that your device is connected to a Wifi access point that is on the same subnet as the Vicon host PC.
On the Vicon host PC, ensure that the required connection is used, that Nexus is running, and the system is connected.
On the device, open the Vicon Control app.
Scroll pagebreak
The connection to Nexus is displayed on the initial Control screen:
Tap the Nexus icon.
You are alerted that you must authorize the connection on the Vicon host PC before you can continue.
In Nexus on the Vicon host PC, an authorization request is displayed:
To use the same connection in future, select Remember this choice for future connection attempts. To permit Control to access Nexus, click Allow.
Scroll pagebreak
On the device, a screen similar to the following is displayed:
If you later need to revoke authorizations, see the following tip.
To select a camera and display a camera view, tap at the bottom of the screen.
You can swipe the camera view right or left to change to the next or previous camera and use stretch and pinch as normal to zoom in and out.
To access the dial control, tap and hold in a selected camera view.
- Use the dial to view and change settings, calibrate and capture.
...