...

In Nexus 2.16 and later, if you're moving your video data to a different location from that where it was originally saved, or if the transcode video xml files are accidentally deleted or become corrupted, you can use an advanced option to ensure that any raw video (VVID) files on the capture drives are added to the transcode list. For more information, see Recover video files.

To transfer and transcode reference video files:

1. On the Data Management tab, in the Show File Transfer/Batch Processing interface (see About transferring and transcoding), click the Video Transfer button.

   Image Removed

   Image Added

   The list in the Trial column includes all digital video capture trials created during video capture.
2. From the list, specify the video files to be transferred in any of these ways:
   
   • Click the corresponding check box to select a specific trial.
   • Click Select All, Select Transferred or Select Untransferred to select the required trials from the list.
   • Click Select None to clear all previously selected trials.

3. In the Video Transfer area, from the Output Options area select one of the supported codecs (h.264 MP4 or h.264 AVI) for compressing the selected video files prior to transfer or select Uncompressed.
   In Nexus 2.13 and later, you can select only the H.264 codec to transcode captured video files, and you can choose from five quality options, ranging from Best Quality/Largest File to Lowest Quality/Smallest File. The H.264 codec is compatible with Theia.  
   For versions of Nexus earlier than 2.13, we recommend that you use the FFDShow codec. You can download it from the Third-Party Plugins page on the Vicon website.
   For information on installing and setting the correct options for the FFDShow codec, see Install the FFDShow codec.

4. Click the Transfer Video button to start transferring the video files associated with the selected trials. Any specified transcoding is performed as the first stage of the transfer process.

...

• Blank: File transfer process idle
• Yellow moving bar: File transfer process in progress
• Green static bar: File transfer process successfully completed
• Red static bar: File transfer process failed or canceled canceled

  Scroll pagebreak

In addition, the Selected files counter enables you to check easily on the progress of the transfer of large numbers of video files.

Image RemovedImage Added

The counter displays both the number of the current video and the total number of videos that are being transferred.  

Anchor
VideoTransferRecovery VideoTransferRecovery

Recover video files

...

1. In the Communications pane ensure the Video Transfer window is displayed.
2. Below the file list, click Show Advanced to display the advanced options.
3. To add any files that may still be on the capture drives to the list, click Rebuild Transcode List.

4. In the Rebuild Transcode List dialog box, click Yes to continue.

   Image RemovedImage Added

   Nexus scans the active folder and looks for VVID files that are still located in their original capture paths.
   Trials that are found with untransferred video files are added to the transcode list.  

   Scroll pagebreak

Anchor
InstallFFDShow InstallFFDShow

Install the FFDShow codec

...

1. Visit the Third-Party Plugins page on the Vicon website.
2. Click on FFDShow Codec and download the file.
3. Install the downloaded FFDShow.exe file.
4. Accept the default options, ensuring that on the Select Components screen, the VFW Interface option is selected.
5. Click Start > All Programs > ffdshow > VFW Configuration.
6. On the Encoder tab, ensure Generic is selected, then select the following options and click OK:
   • Encoder: MPEG-4
   • FOURCC: XVID
   • Mode: one pass - average bitrate
   • Bitrate (kbps): 900
   • Maximum I frame interval: 10
   • Minimum I frame interval: 1
7. In Nexus, you can now select the FFDShow codec from the list of available codecs in the File Transfer area of the Data Management tab.

...