Versions Compared

Version Old Version 7 New Version Current
Changes made by

Andy Roberts

Dev Ops

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Info
Note
When you have finished setting up your system, you can save your current settings by clicking System Settings , to the right of the top menu bar, and then selecting Manage and clicking the Save button. The next time you need to reload your settings, you can select the saved configuration by clicking the relevant option on the System Settings menu. See also Auto save in the Vicon Evoke Reference Guide.

...

  • Valkyrie VK16 and VK26 cameras support Video Preview mode from 30–900Hz. At frame rates above a Valkyrie camera's full frame rate (see Compare Range towards the bottom of the Vicon Valkyrie web page ), Video Preview mode uses windowing to display the same field of view as optical mode.
  • Valkyrie VK8 cameras support Video Preview mode from 30–300Hz at a reduced resolution of 3232 x 2176.
  • Vantage Vero and Viper cameras support Video Preview mode from 30–60Hz. At frame rates above this, an image may be displayed but this has not been tested.Vantage, Vero and Viper cameras do not use windowing in Video Preview mode.

...

  1. When you start Evoke or connect any Vicon devices into your system, Evoke checks to see whether the firmware for your cameras and Beacon(s) is up-to-date.

    If your devices aren’t using the latest firmware, Evoke displays a caution icon in the toolbar to let you know that a more up-to-date version of the firmware is available.

  2. Click the icon to display more information.

    Evoke displays a prompt that enables you to open the Vicon Firmware Manager (reprogramming tool).

  3. Click Yes to open the Vicon Firmware Manager and close Evoke. Note that you can also open the Vicon Firmware Manager from the Start menu (select Vicon > Vicon Firmware Manager).

    Evoke closes and the Vicon Firmware Manager is displayed, showing all the connected devices and their current firmware version.

    For guidance on how to use Vicon Firmware Manager, see the Vicon Firmware Manager Quick Start Guide.

  4. When finished updating, closeVicon Firmware Manager.

    If you opened Vicon Firmware Manager from Evoke directly, Evoke will restart when the Vicon Firmware Manager is closed.