Add markers or remove prop markers

Shogun 1.8 and later enables you to add markers to or remove them from props. This is particularly useful, if, for example, an LED fails and needs to be replaced, or a passive marker falls off a prop.

If a marker is removed from a prop, you can manually select and remove the marker from the reconstruction. Similarly, if a marker is added, you can assign it a label and make it part of an existing reconstruction.

To manually remove a labeled marker from a prop:

1. In the 3D View, select the labeled marker that you want to remove.

2. In the Tracking panel, click the Setup tab.

3. In the Objects section, go to the Modify Object line and click Remove Marker.

   Open

   

   The labeled marker is removed from the object.

To add an unlabeled marker to a prop:

1. In the 3D View, select the required unlabeled marker.

2. At the top of the Tracking panel, CTRL+click to select the required prop.

3. In the Tracking panel, click the Setup tab. Under the Objects section, go to the Modify Object line and click Add Marker.
   The unlabeled marker is added to the selected object.

When you have the right number of markers on your prop, you can then move it into place. For more information on how to do this, see Move props.