Properties pane for Vicon Lock units
- Gisela Roberts
- Ben Stanley
The Properties pane for Vicon Lock nodes contains the following sections.
You can also access related options from the Vicon Lock context menu.
Except where noted, references to Vicon Lock, Lock units, and Lock apply to all current models of the Vicon Lock unit (at the time of publication, this includes Vicon Lock+, Vicon Lock Studio and Vicon Lock Lab).
Vicon Lock Identification section
If a Vicon Lock is connected to your Vicon system, when you click on the relevant Vicon Connectivity node on the System tab, the following controls are available in the Identification section of the Properties pane:
| Setting | Description |
|---|---|
| Name | A user-defined display name for the Vicon Lock. |
| Type | The Lock type is read-only. |
| Device ID | The Device ID is read-only. |
Vicon Lock Status section
On the System tab, when you click on a Lock node, the following controls are available in the Status section of the Properties pane:
| Setting | Description |
|---|---|
| Enabled | Whether or not the Vicon Lock is currently enabled for use. |
| Sync Master | The ViconLock automatically becomes the synchronization master for the Vicon system. |
Vicon Lock Sync Out section
General Purpose Outputs (GPO) enable you to configure your system to trigger external equipment on or around each camera frame sync pulse. Other GPO functionality, available with other Vicon software, is not implemented with Vicon Tracker.
For further information, see the relevant Vicon Lock Quick Start Guide (PDF). For up-to-date information about the types of GPO triggers that are supported, contact your local Vicon Support office (for Vicon contact details, see Contact Vicon).
