Using the Vicon Control app with Tracker

Control connects wirelessly to Vicon Tracker and streams camera data to your mobile or tablet, enabling a single user to change camera settings, calibrate the system, and start or stop capture from anywhere in the volume.

Before you can use your iOS device with Tracker, you must pair it with the PC that is running Tracker (the Vicon host PC).

Connect Vicon Control

To connect an iOS device running the Vicon Control app to Tracker on a Vicon host PC:

1. Ensure that your iOS device is connected to a Wifi access point that is on the same subnet as the Vicon host PC.

2. On the Vicon host PC, ensure that the required connection is used, that Tracker is running, and the system is connected.

   

3. On the device, open the Vicon Control app.The connection to Tracker is displayed on the initial Control screen:

   

4. Tap the Tracker icon.You are alerted that you must authorize the connection on the Vicon host PC before you can continue. In Tracker on the Vicon host PC, an authorization request is displayed:

   

5. To use the same connection in future, select Remember this choice for future connection attempts. To permit Control to access Tracker, click Allow.

   Tip: If later you need to revoke authorizations for Vicon Control, on the Window menu in Tracker, click Reset Control Authorization. This revokes all stored authorizations.

   On the device, a screen similar to the following is displayed:

   

6. To select a camera and display a camera view, tap at the bottom of the screen.

   You can swipe the camera view right or left to change to the next or previous camera and use stretch and pinch as normal to zoom in and out.

   To access the dial control, tap and hold in a selected camera view.

   

   Use the dial to view and change settings, calibrate and capture.