View motion capture data in 3D perspective viewed from a specified point of sight, or direction, of the capture volume.

The 3D Orthogonal view pane contains the following components:

Viewing data in 3D Orthogonal view

View motion capture data in 3D perspective viewed from a specified point of sight, or direction, of the capture volume. You can view 3D data from an orthogonal perspective live in real time or from a previously saved trial.

When you have displayed a 3D Orthogonal view pane, you can:

• Manage the visualization of graph data in the workspace.
• Highlight the representations of specific cameras in 3D Orthogonal view pane workspace by selecting one or more cameras.

To view data in a 3D Orthogonal view pane:

1. Stream live camera data.
2. From the view pane tool bar, select 3D Orthogonal. The reconstructed 3D data from all cameras is displayed in a single 3D Orthogonal view pane, initially from the Top view.
3. From the View list in the 3D Orthogonal view pane tool bar, either leave the default or select another orthogonal projection to set the view to a different point of sight:
   
   • -Z (default)
   • +Z
   • +X
   • -X
   • +Y
   • -Y
     

4. In the 3D Orthogonal view pane, select a marker and perform an action on it in either of the following ways:

   • On the Objects tab, check the reconstruction and labeling and edit any errors or inconsistencies; or

   • Right-click and select a command from the displayed context menu.

     Tip: You can select the Detach Marker command from the context menu displayed when you right-click on a marker in the 3D Perspective view pane.