Capture properties
- Gisela Roberts
- Andy Roberts (Deactivated)
- Ben Stanley
The Capture panel contains these component.
Capture Info section
| Property | Description |
|---|---|
| Capture Folder | Enter or browse to the location of the folder in which to store captured data. Note: by default, at least two files are saved for each capture: the raw camera data (.x2d) and the motion capture file (.mcp) |
| Capture Name | Enter a suitable name that will enable you to identify the capture. This forms the first part (root) of the capture name. If Auto-increment Name is selected (see below), Evoke automatically adds a numerical suffix to the root capture name for each subsequent capture, for example, Capture001, Capture002, Capture003, etc. |
| Auto-increment Name | If selected, appends a number at the end of the root capture name for each capture in a sequence consisting of multiple captures. |
Auto Capture section
You can configure Vicon Evoke to automatically capture data using these controls:
| Property | Description |
|---|---|
| Start on Timecode | Select this check box and specify the timecode at which you want the capture to automatically start, using the format: Where: For NTSC, the separator character changes between a colon ( : ) for non-drop frames and a semicolon ( ; ) for drop frames. For further details on the use of timecode functionality in Vicon systems, see the documentation for your Vicon camera or the Vicon Systems Setup Guide. Default: Cleared |
| Stop on Timecode | Select this check box and specify the timecode at which you want the capture to automatically stop, using the format: Where: For NTSC, the separator character changes between a colon ( For further details on the use of timecode functionality in Vicon systems, see the documentation for your Vicon camera or Vicon Systems Setup Guide. Default: Cleared |
| Stop After Duration | To end the capture automatically after a specified number of seconds, select this check box and enter the required number of seconds. Default: Cleared, 1.00 seconds |
| Broadcast Capture | Select this check box to enable broadcast capture functionality. This enables external systems on the local PC or network to be notified when Evoke initiates a capture. Default: Cleared |
| Triggered Capture | Select this check box to enable triggered capture functionality. This enables another app on the local PC or network to trigger a capture in Evoke. |
Capture section
Specify the type of motion data to be captured by your Evoke system.
| Property | Description |
|---|---|
| Capture Video | Select to capture video from connected video cameras. Default: Selected |
| Capture Buffer Size | Specify the required buffer size for capturing, in MB. |
