Hardware specifications for Vicon LBE systems
- Former user (Deleted)
- Gisela Roberts
Viper camera specification
The following table provides technical specifications and performance indicators for Vicon Viper cameras.
| Component | Specification |
|---|---|
| Resolution | 2.2 MP, 2048 * 1088 |
| Frame rate (minimum) | 30 fps |
| Frame rate (full frame) | 240 fps |
| Sensor diagonal | 12.75 mm |
| Pixel shutter type | Global shutter |
| Pixel size | 5.5 µm square |
| Lens | Tamron 6.5 mm fixed |
| Effective FOV (H x V) | 81.8 x 49.4 |
| Optical filter | Long-pass wavelength matched dye filter |
| Maximum temperature | 30°C 1 |
| Minimum temperature | 5°C 1 |
| Maximum power consumption | 6 W |
| Connectivity | Single RJ-45 connection for Cat6 cabling. Carries power and data and conforms to IEEE 802.3af-2003 (15.4W) standard. |
| Weight | 277 g |
| Camera external dimensions | H x W x D: 80 x 80 x 75 mm |
Operating temperature: While Vicon cameras may operate outside the given limits, these are the temperatures to which Vicon has tested the cameras. If the cameras are operated outside of these limits, image quality may be degraded, the external surface temperatures may exceed the relevant safety limits, and any failures are not covered under warranty.
Température de fonctionnement: Les caméras Vicon peuvent fonctionner au-delà des limites indiquées. Les températures mentionnées ici correspondent aux températures des conditions dans lesquelles les caméras Vicon ont été testées. Au-delà de ces limites, la qualité des images peut être altérée, les températures des surfaces extérieures peuvent dépasser les limites de sécurité et les pannes ne sont plus prises en charge dans le cadre de la garantie.
ViperX camera specification
The following table provides technical specifications and performance indicators for Vicon ViperX cameras.
| Component | Specification |
|---|---|
| Resolution | 6.23 MP, 2496 * 2496 |
| Frame rate (minimum) | 30 fps |
| Frame rate (full frame) | 240 fps |
| Sensor diagonal | 15.9 mm |
| Pixel shutter type | Global shutter |
| Pixel size | 4.5 µm square |
| Lens | Tamron 12 mm fixed |
| Effective FOV (H x V) | 50.2 x 50.2 |
| Optical filter | 850 nm Interference filter |
| Maximum temperature | 35°C 1 |
| Minimum temperature | -5°C 1 |
| Maximum power consumption | 17 W |
| Connectivity | Single RJ-45 connection for Cat6 cabling with ferrite. Carries power and data and conforms to IEEE 802.3at-2009 (25.5W) standard. |
| Weight | 1250 g |
| Camera external dimensions | H x W x D: 166.2 x 125 x 108 mm |
Operating temperature: While Vicon cameras may operate outside the given limits, these are the temperatures to which Vicon has tested the cameras. If the cameras are operated outside of these limits, image quality may be degraded, the external surface temperatures may exceed the relevant safety limits, and any failures are not covered under warranty.
Température de fonctionnement: Les caméras Vicon peuvent fonctionner au-delà des limites indiquées. Les températures mentionnées ici correspondent aux températures des conditions dans lesquelles les caméras Vicon ont été testées. Au-delà de ces limites, la qualité des images peut être altérée, les températures des surfaces extérieures peuvent dépasser les limites de sécurité et les pannes ne sont plus prises en charge dans le cadre de la garantie.
Pulsar specification
| Component | Specification |
|---|---|
| Power | Internal 3.7 V nominal lithium polymer battery (fixed) |
| IR wavelength | 850 nm |
| Distinct LED patterns in use | 70 (max for four markers) 56 (max for five markers) |
| Patterning | 5 LEDs on of 8 fitted |
| LEDs for status indication (status light) | Battery (Green) Radio (Blue) Sensor failure (Red) |
| Physical multifunction switch | Power, pairing, reboot |
| Run time | 10 hrs (min) |
| Charge interface | USB micro-B receptacle |
| Recharge time to 80% | 1 hr (max) |
| Recharge time to 100% | 3 hr (max) |
| Range (optical) | Up to 8 m with Viper cameras Up to 18 m with ViperX cameras |
| RF frequency band | 2.4 GHz |
| Range (RF) | 20 m |
| Wireless protocol | IEEE 802.15.4 |
Beacon specification
| Component | Specification |
|---|---|
| Power | Power over Ethernet (PoE) class IEEE 802.3af Type 1 device |
| Max power consumption | 6 W |
| Dimensions | 80 x 80 x 70 mm |
| Weight | 390 g |
| Mounting | 1/4"-20 mount |
| Number of Pulsars per Beacon | 72 |
| Number of Beacons per volume | Up to 16 |
| Number of Beacons operating simultaneously in adjacent volumes | Up to 16* |
| Sync frequency | 240 fps (max) |
| RF frequency band | 2.4 GHz |
| Range (RF) | 20 m |
| Wireless protocol | IEEE 802.15.4 |
*Depending on RF spectrum occupancy at site
