Vicon Cameras context menu

When you right-click on a camera node in the Vicon Cameras list in the System panel, you can select from the following options on the context menu:

Option	Description
Reorder Vicon Cameras	Display the Reorder Vicon Cameras dialog box. This enables you to change the order in which Vicon cameras are displayed in the Vicon Cameras list.
Remove	Select from these options: Disconnected - Removes cameras that have previously connected to the application session, but are no longer connected (eg, due to being unplugged).. Missing - Removes cameras that have been loaded from a system or camera calibration file, but have not connected to the application. Selected - Removes cameras that are currently selected.
Resynchronize	This setting resynchronizes all input types into Tracker.
Video Preview Mode	Select the required option to enter or exit Video Preview Mode. For more information, see Check camera aim and field of view.
Reboot	Select from these options: System - Reboots all of the Vicon hardware devices in the Vicon system. Use this option if a camera has failed to boot, or if you need to reset the whole system for other reasons. Selected - Reboots selected devices Non-Contributing - Reboots non-contributing cameras. Cameras - Stops and restarts all the Vicon cameras in the system. Connectivity Devices Clusters
Set Preferred Sync Source	If multiple connectivity devices are present in the system, enables you to select your primary connectivity device. Genlock and timecode can only be provided by a primary connectivity device. Default: Automatic If your system contains a Vicon Lock connectivity device, this is automatically selected as the sync source. For more information, see Preferred Sync Source.
Select All Cameras	Provides a quick way to select all cameras listed in the Vicon Cameras list
Select Type	Provides a quick way to select Vicon Cameras, Connectivity Devices, or Analog Devices