Manage camera calibrations

At the top of the Camera Calibration panel, the buttons enable you to load, save or clear camera calibrations in your Tracker system.

As noted in Calibrating Vicon cameras, the camera calibration files that are saved after a completed calibration are not permanent and can be overwritten. If you want to keep a calibration so that it is not removed from this folder, you must save it.

If you want to extract the .xcp from a motion capture file (.mcp), such as one from a captured review, you must load that review and save it.

Loading and saving calibrations can be useful for:

• Comparing calibration changes
• Streaming data through Vicon Virtual System (see the Vicon Virtual System User Guide)

To manage camera calibration files in Tracker:

• At the top of the Camera Calibration panel, click the required button:

  

  See the table below.