/
Configuring your Vicon Tracker system

Configuring your Vicon Tracker system

You configure the hardware components of your Vicon Tracker system in the System panel. You can view and configure further system-wide settings in the Processing panel.

To configure your Vicon system:

When you first set up your Vicon system, ensure that the frame rate displayed at the top of the System panel is as required. If you need to change the frame rate:

  1. At the top of the System panel, in the Frame Rate field, specify the required value (in Hz).
  2. If you need to view or change settings for other system properties, ensure the Advanced properties are displayed and make any required changes.

Note
Some properties are available only when advanced properties are displayed (at the top right of the panel, click Advanced Parameters ).

For more information on setting up your Tracker system, see the following topics:

Related content


© Copyright Vicon Motion Systems. All rights reserved.

Vicon trademarks