Mixed Vicon Valkyrie system cables
- Gisela Roberts
The following tables describes the cables (additional to those listed in Basic Vicon Valkyrie system cables) for connecting hardware components in a mixed Valkyrie system that includes older Vicon cameras (Vantage, Vero or Viper) as well as Valkyrie cameras. Use this information to identify the correct cables and connection points to use when setting up a mixed Valkyrie system.
Note that these topics do not describe all the cables supplied with Vantage systems; it is assumed that any Vantage system cameras and switches are already connected with the originally supplied cables. For descriptions and uses of Vantage cables, see the documentation for your Vicon Vantage system.
For details of this type of system, see Set up a mixed Valkyrie system with Vantage or Vero cameras.
Vicon Lock to Ethernet switch cable
Use this cable to connect a Lock to a PoE++ or PoE+ switch.
| Cable name | Vicon Lock end | Switch end | Description |
|---|---|---|---|
| Lock to PoE++ RJ45 cable (Cat 6) 5m |
|
| A Vicon-supplied, shielded RJ45 Standard 1000Base-T Gigabit Ethernet network cable, Cat 6 (minimum) |
Lock power switch to data switch cable
If your mixed system includes a data switch and a Lock, use this this cable and transceiver to connect the Lock power switch to the data switch (Ethernet to SFP+). For information on transceivers, see SFP+ transceivers for Valkyrie systems.
| Cable name | Lock switch end | Data switch end | Description |
|---|---|---|---|
Lock switch to data switch cable | | | Shielded RJ45 Standard 1000Base-T Gigabit Ethernet network cable, Cat 6 (minimum) |
SFP-10G-T-PLU SFP+ Transceiver |
|
| SFP+ 10G transceiver, converts SFP+ ports to copper 10GBase-T (RJ45) up to 30 meters |
