Basic Vicon Valkyrie system cables

The following tables list the cables that are used in a basic Vicon Valkyrie system for up to eight Valkyrie cameras. For details of this type of system, see Set up a basic Vicon Valkyrie system.

You can use the following information to identify the correct cables and connection points to use when setting up your Valkyrie system.

Vicon Valkyrie camera to Ethernet switch cable

Use this cable with the supplied cap and seal to connect a Valkyrie camera to a PoE++ switch.

Cable name	Valkyrie camera end	Switch end	Description
Valkyrie Cable Ethernet Cap-ASY (30 m and 50 m)	8-pin RJ45 plug	8-pin RJ45 plug	A Vicon-supplied RJ45 Standard 1000Base-T Gigabit Ethernet network cable (Cat 6), fitted with a cap and seal for IP65 rating
Valkyrie Cat 6 Ethernet Cable (30 m and 50 m)	8-pin RJ45 plug	8-pin RJ45 plug	RJ45 Standard 1000Base-T Gigabit Ethernet network cable (requires Vicon-supplied cap and seal for IP65 rating)
Valkyrie Cable Ethernet Seal and Cover	NA	NA	A Vicon-supplied cap and seal which, when correctly fitted to a Cat 6 shielded Ethernet cable, ensures the IP65 protection of the Ethernet port on a Valkyrie camera

Vicon Valkyrie host PC to Ethernet switch cable

Use this cable to connect a host PC to a PoE++ switch.

Cable name	Host PC end	Switch end	Description
Cat 6 Ethernet cable (5 m)	8-pin RJ45 plug	8-pin RJ45 plug	RJ45 Standard 1000Base-T Gigabit Ethernet network cable (Cat 6).

Valkyrie Documentation

Basic Vicon Valkyrie system cables

Vicon Valkyrie camera to Ethernet switch cable

Vicon Valkyrie host PC to Ethernet switch cable

Related content