Vicon Lock context menu

Note
Except where noted, references to Vicon Lock, Lock devices, and Lock apply to all current models of the Vicon Lock (at the time of publication, this includes Lock Studio and Lock Lab).

If a Vicon Lock is connected to your Vicon system, when you right-click on its node in the Connectivity Devices section of the System panel, you can select the following options from the context menu:

Option	Description
Reorder Connectivity Devices	Display the Reorder Connectivity Devices dialog box in which you can change the order in which Vicon Lock units are displayed in the System panel.
Remove	Choose between Disconnected, Missing, and Selected devices.
Resynchronize	This setting resynchronizes all input types into Tracker. This has the same functionality as the setting in the Vicon cameras context menu (Vicon Cameras context menu)
Reboot	Stop and restart the selected components. You can choose from System, Selected, Non-contributing, Cameras, Connectivity Devices, or Clusters.
Set Preferred Sync Source	If the system contains multiple connectivity devices, one of them is automatically selected as the sync source. However, you must ensure that the sync source is connected to the switch with the shortest network path to the host PC (known as the primary device). Also note that genlock and timecode can only be provided by the sync source device. Because Tracker cannot detect which connectivity device is connected via the primary device to the PC, you may need to change the automatically selected source. In the System panel, the entry for the device selected as the Vicon system sync source is displayed in bold.
Create Analog Device	Enables you to create an Analog Device node. For more information, see Configure analog devices.
Select All Cameras	Provides a quick way to select all the cameras listed in the Vicon Cameras list.
Select Type	Provides a quick way to select Vicon Cameras, Connectivity Devices, or Analog Devices

Tracker 4.1 Documentation

Vicon Lock context menu

Related content