/
Known issues in Vicon Shogun

Known issues in Vicon Shogun

Owned by Adaptavist ScriptRunner for Confluence Cloud (Unlicensed)
Jul 11, 2024

The following issues are known to exist in Vicon Shogun 1.13 :

DescriptionWorkaround
In Live, if you disconnect a Teledyne FLIR Blackfly S camera and then reconnect it, the camera does not reconnect to Shogun. The same issue occurs if you reboot the cameras.To reconnect (or reboot) the cameras, make sure all the cameras are reconnected and then restart the software.

Joint centers in the foot are sometimes inaccurately positioned during subject calibration.

Auto-Skeleton guarantees more accurately positioned feet and can be used to quickly generate a new skeleton, which can then be used in Shogun Live - Video tutorial on YouTube.
In Live, objects that have the property Track With Object Tracker enabled do not generate markers in the DataStream.None at present. To be addressed.
In Live, the viewport can be slow to respond, for example, if a video camera is unplugged.Change the processing level and the viewport will reboot.
RSS Processors and RSS Queues maximum values can be set too high.The maximum number of RSS Processors and RSS Queues needs to be set 8. (8 used to be the maximum however the latest network cards can go considerably higher.)
In Live, in systems with large numbers of cameras, a high number of dropped frames occurs.Do one of the following:
  • Use Shogun's multi-machine feature (see Run Shogun processing on multiple machines in Getting more from Vicon Shogun).
  • Use the Process in Realtime option in Shogun Live (on the System tab, select the required camera(s) and in the Capture properties below, clear the Process in Realtime option). You can use this option to exclude cameras from reconstruction, while keeping them in the captured X2D and 2D workspace.

    Important: Remember that if you use this feature to exclude cameras, their data will not be present in the resulting MCP file. To include the data from excluded cameras, instead reprocess from the X2D file.
In Shogun Post, retargeting position constraint weights have a higher strength than rotation constraint weights.Use lower values for retargeting position constraint weights. .01 or .001 position and 1.0 for rotation tend to work well.
In Post, the retargeting doesn't always converge or fit well at the start.Make sure you have set the map pose which copies rotation values to pre-rotations so that the target and source skeleton axes align as closely as possible. Otherwise pad the start of your takes by a couple of seconds.
In Post, occlusion fixing across a range is disabled.
Occlusion fixing must only be run once on the whole take. If occlusion fixing was turned on during capture in Shogun Live (the default setting) and there are issues with your data, Vicon recommends that you restore the data to its non occlusion-fixed state using the Restore feature in the Marker Editing panel. Then fix any marker issues like swaps or mislabels before re-running occlusion fixing on the whole take by selecting the required option in the Processing panel. For information on fixing marker issues, see the Vicon videos: 5 - Shogun Post - Labeling Data and 6 - Shogun Post - Marker Editing.
In Post, when creating a HSL script, description fields longer than 511 characters for an input variable cause the software to stop responding.None at present.

Related content