Set up Tobii Pro Glasses

To set up your Tobii Pro Glasses for use with Tracker:

1. Follow the instructions provided by Tobii. The quick start guide provided in the Tobii Pro Glasses box provides instructions on preparing and connecting the glasses to the recording unit.

   

2. To use Tobii Glasses software, connect the Tobii Pro Glasses, either through Ethernet or WiFi, by following the instructions provided by Tobii.

   When setting up networking connection properties for an Ethernet port, ensure that you select the required option:

   • For Tobii Pro Glasses 2, select Internet Protocol Version 6 (TCP/IPv6).
   • For Tobii Pro Glasses 3, you can select Internet Protocol Version 4 or Internet Protocol Version 6

3. Calibrate the glasses in the Tobii Glasses software.

   This enables you to check the fit of the glasses before connecting to Vicon Tracker.

4. After calibration is complete, close the Tobii Glasses software.