About this guide

This guide contains instructions for using Vicon Nexus. It explains configuring your Vicon system within Nexus and the basic tasks that make up the everyday Nexus workflow. It assumes you have already installed and licensed Nexus and set up your Vicon system hardware. If you need information about these procedures, see Installing and licensing Vicon Nexusand/or the Vicon documentation that was supplied with your hardware, or for help with how to connect up your Vicon system, see /wiki/spaces/Connect/pages/11829572. You can also contact Vicon Support.

• Introducing Vicon Nexus
• Prepare a Vicon system
• Calibrate a Vicon system
• Prepare a subject
• Capture movement trials
• Review trials and fill gaps
• Modeling with Plug-in Gait
• Work with digital video files
• Work with Vicon IMUs
• Export trial data
• Further resources

Videos of many of the procedures described in this guide, including additional tips and examples, are available from the Nexus 2 How To playlist and the Vicon Nexus 2 Tutorials playlist on YouTube, beginning with system calibration.