Erase data from sensors
- Gisela Roberts
To remove unwanted data from your sensors, you can delete it in one of these ways:
Erase data from a single sensor
To erase data from one or more sensors, you can delete the data using the relevant Erase button on the Sensors tab.
To erase data from a sensor:
- Ensure the sensor(s) from which you want to erase data is connected.
-
Click Sensors and then for the required sensor, click Erase data.
A message notifies you that all data will be erased from the sensor and you're given the opportunity to confirm or cancel.
-
To delete the data from the sensor, click Erase.
When the data has been erased from the sensor, the Erase button is disabled and if you click the down arrow, you can see that the Sessions information now shows a zero.
Erase data from all connected sensors
To erase sensor data from all connected sensors:
-
On the Sensors tab, click Erase all sensors.
If the firmware for any of the selected sensors needs updating, you are alerted that the data cannot be not erased from those sensors until the firmware is updated.
