Set Vicon Markerless camera focus and aperture

After you've installed and licensed Vicon Shogun Markerless and positioned the cameras, you can set the camera aperture and focus.

Set the aperture on the camera to enable you to view the scene.

If the image that you see of the subjects isn't sharp enough, ensure the volume is sufficiently and evenly lit, and focus the camera so that you can see a clear image of the subjects throughout the volume (or within the part visible to the camera). To focus the camera, loosen the grub-screw above the lens and screw the entire lens in/out.

For information on how to adjust the brightness of the lights, see Set the brightness of the Vicon IR lights.