/
Open a Nexus Insight report
  • Ready for review
  • Open a Nexus Insight report

    You can open a report that was created in Nexus Insight from within Nexus Insight, from within Vicon Nexus, or, if Windows file associations are set appropriately, from Windows File Explorer.

    When you have opened a report, if you want to select an alternative report template, see Select a different report template.

    Open a report in Nexus Insight

    1. In Nexus Insight, expand the folder that contains the required report.

    2. On the line that contains the required report, click View report.

      The selected report is displayed.

    Open a report in Nexus

    1. In Nexus, on the Data Management tab, navigate to the required report.

    2. Either double-click the report or right-click and select Open.

      Nexus Insight starts and opens the selected report.

    Open a report from Windows File Explorer

    To open a Nexus Insight report from Windows File Explorer:

    • In a folder that contains a Nexus Insight file, double-click a file with the extension .insight.
      Nexus Insight opens into the relevant report page.

    The above procedure only works if the appropriate Windows file association has been set. This normally happens automatically when you install Nexus Insight. However, if Nexus Insight doesn’t open when you double-click a file with the .insight extension, you can set it manually as described in Start Nexus Insight from Windows File Explorer.

    Related content


    © Copyright Vicon Motion Systems. All rights reserved.

    Vicon trademarks